Auckland +64-9-634-7128

 

Wellington +64-4-939-1010

 

Melbourne +61-3-9338-1077

01478

Temporary

Temporary surface adhered preformed lnductive loop
Enquire

For temporary installation on the surface

  • 9.5mm

9.5mm Inductive Loops - Model CG9.5MM

Conduit
  • Highly abrasion-resistant Polyurethane alloy cover
  • High tensile strength braided synthetic yarn reinforcement
  • Good flexibility over a wide temperature range
  • Minimum impact pressure of 3000 psi (20,680 kPa)
  • Nylon alloy core tube
  • Superior resistance to oil, gasoline, salt, moisture and impact
  • Max. o.d. of 3/8” (9.5 millimeter)

Connection – Loop Head to Loop Lead-In
  • High tensile strength / tenoerature self-locking Polyethylene “T” connector to connect the loop head to the protected lead-in (No wire splices)

Wire
  • Loop wire is 20 gauge silver coated with Teflon jacket, stranded, single conductor wire.
  • Number of turns to be determined by engineer or factory and will depend on loop size, loop depth, presence of reinforcing steel and other special factors
  • Lead-in wires shall be machine twisted at a minimum of 8 twists per foot (30 cm).
  • One continuous wire shall be used to manufacture the loop and lead-in, no splices shall be allowed.
  • Extra wire shall be incorporated throughout the conduit by means of the “Z” method to compensate for pavement movement.

Miscellaneous
  • Loop and lead shall be filled with a flexible rubber self sealing emulsion to prevent moisture entering the conduit and prevent false calls from movement of the wire within the conduit.
  • Preformed loops shall be commercially manufactured.

     

  • Quality control of the end product shall be performed and passed as specified in the Preformed Inductive Loop (P-ILD) Handbook V.2.4 and be submitted to the end user.
  • Loops shall be individually marked as to the direction of the wire turns.
  • Preformed loops shall have a 15 year minimum manufacturer's guarantee.

You might also be interested in ...

About us

HTS Group Ltd was established in 2000. The company is ISO 9001 :2008 BVQI accredited and the leading provider of services to the Public Transport, Traffic and Sports Timing Industry in New Zealand, Australia & The Pacific

Read more
 

Get in touch

Auckland +64-9-634-7128
Wellington +64-4-939-1010
Melbourne +61-3-9338-1077

sales@htsgroup.co.nz